We Supply and Fit Caravan Accessories
Battery Management Set Ups
Remote Charging Systems
Electric Braking Systems
Call now for a Safety Check before you head out on your next trip
Mobile Service Available
S&K The Mobile Way
Battery Management Systems
Dual Battery Setups
All 12volt lighting
Brake away Systems
Solar Installs & Repairs
Supply & Install of Gas Detectors
Off grid Solar Setups
BCDC Smart Isolators
Electric Brake Units
Auxiliary batteries are used to operate appliances while you are away from main 240v power supply. To eliminate the risk of compromising your vehicles main starting battery we run a Dual Battery Setup with a reliable isolator.
The bigger the battery the better. You will then get optimal capacity when needed and longevity out of your battery.
We supply & fit all types of deep cycle batteries for this application - however we do prefer AGM / Gel Century Batteries - they are far more superior to a lot of brands.
IF YOU ARE PLANNING ON STAYING IN THE ONE PLACE FOR AN EXTENDED PERIOD OF TIME (3 Days or more). We recommend you use a solar panel to keep your battery charged – no need to start that vehicle or go for a charge up drive. Portable panels are great as you can follow the sun to gain optimal input.
Smart Start Battery Isolator
Cost-effective protection against a flat battery
Smarter than a continuous duty solenoid
Silver contacts for longer life
Power saving technology
Cooler operating temperature
Only draws approximately 0.15A when engaged
LED lights when thesolenoid is activated
Electric Brake Unit
The REDARC range of Electric Trailer Brake Controllers put you in charge… not your trailer. All REDARC brake controllers are capable of operating up to 3 axle trailer brakes, and all operate with a progressive brake application to the level set by the user. The Redarc range of electric trailer brake controllers provide an easy to operate method of controlling electric brakes on a trailer, camper-trailer, boat trailer or caravan. A GREEN light from the LED indicator means that a trailer with electric brakes is plugged in. Application of the brakes from either the foot brake or the manual button on the controller will change the LED to a shade of RED.
The shade of RED indicates to what level the brakes are applied. The adjustment knob will set the level of braking, for both the manual button and the foot brake.
Electric Brake Unit – Remote Mount
The Remote Mount model comes with the LED and controls remote from the unit. This allows mounting of the controls up to 500mm away from the main unit. The controls are small enough to be mounted in the dash through a standard push-out switch panel. The main unit can be mounted out of sight, and the controls will have minimal visual impact on the vehicle. The braking gain adjustment knob and the manual override pushbutton are the same control, which allows the operator to adjust the braking level whilst operating the manual override function.
Electric Brake Unit – Trailer Mount
Redarc brake controllers have the option of an encapsulated trailer mount unit. The Trailer Mount model is completely potted in a silicone elastomer to ensure protection against vibration and the weather. As the manual button is not needed, it has been removed and the controller requires an auxiliary 12V available at the trailer socket. Apart from this the unit operates as the standard brake controller does.
An inverter turns the energy stored in a standard deep cycle battery into household 240volts AC power. This power can be used to run almost any AC appliance, including radio, Video, TV, kitchen appliances, power tools, medical equipment, lights, motors and basically anything that operates on 240V.
Pure sine wave output (THD < 3%)
Output frequency：50 / 60Hz switch selections
Input & output fully isolated design
Power Saving Mode to conserve energy
High efficiency : 89~94%
Driving highly inductive & capacitive loads at start moment
Tri-Color indicators show input voltage & output load level
Loading controlled cooling fan
Advanced microprocessor controls
Protection： Input low voltage Overload Short circuit
Low battery alarm Input over voltage Over temperature
Baintech DC Socket Power Boards
Left or Right Application -Ready to wire to your battery
Surface Mount - PVC Housing
Digital LCD Backlit Display
Circuit Breaker Protected
On/Off Isolation Switch
Cigarette and Merit Sockets
2 Year Warranty
Low Coolant Alarm
The Redarc LCA1224 is used in a 12V or 24V automotive system to monitor radiator coolant level and provide a visual and audible alarm if the coolant falls below the chosen level. It can give warning of a sudden loss of coolant (Eg from a burst radiator hose) and allow the operator to stop the vehicle and switch off the engine, to prevent any damage due to over-heating.damage due to over-heating.